Rapid Prototyping - Calcutta House CMB-21, CMB-21a and CMB-21b
Sound Monsters by Sofia Oberg
Sound Monsters, pictured above, are audio teaching aids for storytelling and writing in primary school Key Stage 1. Visit designer Sofia Oberg's website for more of her illustration, furniture and product design work.
Resources and open access
3D printing - rapid prototyping
Our Z-Corp three-dimensional printers build objects using a plaster-like material bonded with a specialist bonding agent. The parts are infiltrated with Epsom salts, wax or an epoxy resin to increase their strength. 3D Printing is ideal for producing 3D models, moulds or masters.
SLS (Selective Laser Sintering) - rapid prototyping
The EOS P385 system is suitable for producing more durable and intricate models. The machine builds with a polyamide powder which is melted layer by layer to create fully functional parts from white PA2200 Nylon. The powder-based system requires no additional support structure making SLS the ideal method for producing intricate models and moving components. The referred build envelope is 300mm x 300mm x 640mm.
Perfactory three-dimensional printing rapid prototyping
The Envisiontec Perfactory uses a photo-polymer resin cured with a light. It has a small build volume but a very high resolution making it ideal for applications where ultra fine detail is required such as jewellery design and micro manufacturing.
Fused Filament Fabrication (FFF).
3D scanning captures an object’s 3D physical form and converts it into digital data. The data can then be measured, analysed and manipulated virtually within a 3D computer software programme. This technology is often used by craft practitioners and sculptors, as hand built work and found objects can be captured ready for manipulation on a computer.
Calcutta House CMB-21, CMB-21a and CMB-21b.
Please see the schedule for access times.
Please download The Completed Guide (PDF).
Recent news from The Cass
London Met graduate is announced the winner at the National Association of Shopfitters Design Partnership Awards.
A group of female artist-metalsmiths have recently exhibited at the inaugural TRESOR Contemporary Craft in Switzerland.
BA Fine Art graduate is a finalist for a national award.
London Met’s The Cass Architecture tutor, Peter St John, is to design the British Pavilion at next year’s Venice Biennale.
London Met PhD student founds charity, providing bespoke music instruments and workshops where disabled people make a new kind of community music.
Furniture and Product Design graduate, Mandie Beuzeval, has had a great success at the 2017 London Design Festival with her 'Great Dryer'.
A Cass Fine Art alumnus presents a solo exhibition, called Real Reality, at Beers London.
Jewellery Design graduate wins a prestigious award at the Goldsmiths’ Fair 2017.
An architect who lectures at London Met’s Art, Architecture and Design school, The Cass, appeared on Grand Designs earlier this month.
Senior lecturer, Dr Jacek Ludwig Scarso, exhibited Precarious Balance / Equilibrio Precario at ArteSpazioTempo in Venice.
School celebrates it's coming together with series of exhibition and events attended by hundreds.
New solo exhibition of night photography by The Cass alumnus David George.
The Cass hosts an immersive exhibition exploring the diversity of Belgian architecture.
A group of graduates from The Cass, who took part in the successful Cass Starters project, will be exhibiting with SCP as part of the London Design Festival.
Artist Jaykoe , an alumnus of MA Fine Art at The Cass has two imminent exhibitions